16 releases 23 tags

RSS feed

• v0.8.4 1a5d9eda56

  Compare

  v0.8.4 Stable

  r3pek released this 2026-09-17 13:42:32 +01:00 | 0 commits to main since this release

  • Added LightPollResult.lunar_enabled/lunar_phase_day: the device's
    own actual LunarPhasesEnabled setting and current lunar-cycle phase,
    correct at any time of day. Not the same as
    intensities.diagnostics's own lunar_enabled/lunar_date keys,
    which are only meaningful at night.

  Downloads

  • Source code (ZIP)
    0 downloads
  • Source code (TAR.GZ)
    0 downloads

  ---

  • python_mobius-0.8.4-py3-none-any.whl
    0 downloads · 2026-09-17 13:42:34 +01:00 · 154 KiB
  • python_mobius-0.8.4.tar.gz
    0 downloads · 2026-09-17 13:42:36 +01:00 · 301 KiB
• v0.8.3 3361af8739

  Compare

  v0.8.3 Stable

  r3pek released this 2026-09-17 08:41:05 +01:00 | 3 commits to main since this release

  • Added set_lunar_enabled(enabled). Confirmed byte-for-byte against
    the app's own compiled bytecode: exactly what its "Lunar" chip (top
    of the light schedule editor) writes when toggled.

  Downloads

  • Source code (ZIP)
    0 downloads
  • Source code (TAR.GZ)
    0 downloads

  ---

  • python_mobius-0.8.3-py3-none-any.whl
    0 downloads · 2026-09-17 08:41:07 +01:00 · 153 KiB
  • python_mobius-0.8.3.tar.gz
    0 downloads · 2026-09-17 08:41:08 +01:00 · 300 KiB
• v0.8.2 17c9ce81a4

  Compare

  v0.8.2 Stable

  r3pek released this 2026-09-16 09:04:58 +01:00 | 5 commits to main since this release

  • Added LightPollResult.schedule_intensity: the device's own raw
    schedule-level master dimmer, matching get_schedule_intensity()'s
    own return value. Not the same as intensities.diagnostics["scalar"],
    which reflects whichever value is currently in effect (the lunar
    reduction factor during a night segment, not the schedule intensity
    setting itself).

  Downloads

  • Source code (ZIP)
    0 downloads
  • Source code (TAR.GZ)
    0 downloads

  ---

  • python_mobius-0.8.2-py3-none-any.whl
    0 downloads · 2026-09-16 09:04:59 +01:00 · 152 KiB
  • python_mobius-0.8.2.tar.gz
    0 downloads · 2026-09-16 09:05:01 +01:00 · 299 KiB
• v0.8.1 89114186d0

  Compare

  v0.8.1 Stable

  r3pek released this 2026-09-12 15:32:21 +01:00 | 7 commits to main since this release

  • Added get_pump_reverse(primitive_type, params): whether a pump
    schedule point's MaxSpeed/MinSpeed value currently encodes reverse
    rotation. Only AlpacaV1 pumps support this -- every other primitive
    type always returns None.
  • Added reboot_all(): soft-reboots every device on the mesh at
    once, matching the app's own "Restart all Devices" tank setting.

  Downloads

  • Source code (ZIP)
    1 download
  • Source code (TAR.GZ)
    1 download

  ---

  • python_mobius-0.8.1-py3-none-any.whl
    1 download · 2026-09-12 15:32:23 +01:00 · 152 KiB
  • python_mobius-0.8.1.tar.gz
    0 downloads · 2026-09-12 15:32:25 +01:00 · 298 KiB
• v0.8.0 eb7337b411

  Compare

  v0.8.0 Stable

  r3pek released this 2026-09-11 09:23:20 +01:00 | 11 commits to main since this release

  • Added supported_pump_modes(primitive_type, closed_loop=None): the
    PumpMode values a given pump actually supports. See
    documentation/07-pump-schedule.md's own "Which modes a given pump
    actually supports" section.
  • Added schedule write support: set_light_schedule()/set_pump_schedule(),
    GroupBitmap (group_mask), and --dump-schedule-file/--load-schedule-file
    CLI flags.
  • Added support for .mob (Template) files -- export/import for both
    light and pump schedules, plus --dump-mob-file/--load-mob-file CLI
    flags.
  • --load-schedule-file/--load-mob-file now write to every device in a
    light's schedule group, not just the one named, and check the whole
    group's smallest schedule capacity up front so a too-large schedule
    aborts cleanly instead of partially applying.
  • get_pump_telemetry() now also includes every other sensor value a
    pump reports supporting (motor RPM, temperatures, battery/input
    voltage, etc.) under a new extra_physical_values key, alongside the
    existing gph/motor_power_watts.
  • Added get_extra_physical_values() -- the same extra sensor values as
    above, for callers with no get_pump_telemetry()-equivalent method of
    their own. get_device_summary() uses this for lights specifically
    (ClusterTemperature/DriverTemperature/etc.), which previously had no
    way to surface this data at all.
  • Added get_fan_thresholds() -- FanOnTemperature/FanOffTemperature,
    shown unconditionally in get_device_summary().

  Downloads

  • Source code (ZIP)
    0 downloads
  • Source code (TAR.GZ)
    1 download

  ---

  • python_mobius-0.8.0-py3-none-any.whl
    1 download · 2026-09-11 09:23:22 +01:00 · 151 KiB
  • python_mobius-0.8.0.tar.gz
    1 download · 2026-09-11 09:23:24 +01:00 · 297 KiB
• v0.7.2 2870e313d7

  Compare

  v0.7.2 Stable

  r3pek released this 2026-09-02 00:53:11 +01:00 | 47 commits to main since this release

  • get_full_poll_batch() now includes scene data (ConfiguredScenes/
    CurrentScene) in the same combined request, falling back to
    get_configured_scenes()/get_current_scene() if the batch itself
    fails.
  • start_scene()/start_feed_mode() now broadcast to the whole mesh by
    default (one write instead of one per device) -- pass
    broadcast=False for the old, single-device-only behavior.

  Downloads

  • Source code (ZIP)
    2 downloads
  • Source code (TAR.GZ)
    0 downloads

  ---

  • python_mobius-0.7.2-py3-none-any.whl
    1 download · 2026-09-02 00:53:13 +01:00 · 138 KiB
  • python_mobius-0.7.2.tar.gz
    1 download · 2026-09-02 00:53:14 +01:00 · 257 KiB
• v0.7.1 e45c5bf97f

  Compare

  v0.7.1 Stable

  r3pek released this 2026-09-01 22:35:20 +01:00 | 50 commits to main since this release

  • Added scene support: get_configured_scenes(), get_current_scene(),
    start_scene(). Fixed get_current_scene() crashing on a custom
    (non-preset) scene, and start_scene()'s duration being in seconds,
    not minutes as previously labeled.

  Downloads

  • Source code (ZIP)
    1 download
  • Source code (TAR.GZ)
    1 download

  ---

  • python_mobius-0.7.1-py3-none-any.whl
    3 downloads · 2026-09-01 22:35:21 +01:00 · 138 KiB
  • python_mobius-0.7.1.tar.gz
    1 download · 2026-09-01 22:35:23 +01:00 · 255 KiB
• v0.7.0 03c18289aa

  Compare

  v0.7.0 Stable

  r3pek released this 2026-09-01 11:05:19 +01:00 | 52 commits to main since this release

  • Added get_full_poll_batch() -- one round-trip for device identity +
    metadata + light/pump state, confirmed 2-2.6x faster on real
    hardware. Requires the caller to already know the device's own
    PrimitiveType (permanent for its lifetime, so never re-fetched).
  • get_current_pump_block() now accepts an optional pre-fetched
    points param, skipping its own redundant re-fetch of the same
    schedule attribute.
  • Added get_light_poll_batch() -- one round-trip for a light's own
    schedule, lunar/acclimation/insolation state, and Epoch/LocalTime,
    falling back to the original individual reads if the batch fails.
  • Extracted every light-schedule-related method's own decode/compute
    logic into pure, standalone functions, laying the groundwork for
    get_light_poll_batch() above. No behavior change.

  Downloads

  • Source code (ZIP)
    0 downloads
  • Source code (TAR.GZ)
    0 downloads

  ---

  • python_mobius-0.7.0-py3-none-any.whl
    3 downloads · 2026-09-01 11:05:21 +01:00 · 135 KiB
  • python_mobius-0.7.0.tar.gz
    1 download · 2026-09-01 11:05:22 +01:00 · 252 KiB
• v0.6.0 ff79a56b36

  Compare

  v0.6.0 Stable

  r3pek released this 2026-08-31 10:27:15 +01:00 | 57 commits to main since this release

  • get_metadata_batch() now falls back to individual reads if the
    batched request itself fails (e.g. no batch support at all) --
    never returns less than those would have. New used_batch field,
    force_individual_reads param.
  • Added get_metadata_batch() -- one round-trip for AdvancedFeatures/
    CalibrationInfo/hardware/firmware/channels/error state/time,
    confirmed 6-14x faster than individual reads over relay.
  • Wired set_advanced_features() into cli.py -- one flag per field
    (--set-local-control-enabled/--set-auto-dim-timeout/
    --set-max-fan-speed/--set-fan-shutdown-enabled).
  • Added set_advanced_features() -- writes LocalControlEnabled/
    AutoDimTimeout/MaxFanSpeed/FanShutdownEnabled, whichever are given.
  • get_current_light_intensities() now uses get_app_lunar_date(),
    deliberately replicating a confirmed app bug in its lunar
    calculation instead of the physically correct date.
  • Fixed RelayedMobiusDevice missing overrides for
    get_supported_attributes()/get_attributes_batch() -- both bypassed
    the relay path entirely.
  • Fixed --dump-attributes/--set-time-to-now in cli.py ignoring
    --relay-target.
  • Added get_attributes_batch() -- reads multiple attributes in one
    round-trip.
  • Added get_supported_attributes()/dump_attributes()/
    enrich_attribute_dump(), replicating the app's own attribute-dump
    feature. New CLI flags: --dump-attributes/--parse-dump.

  Downloads

  • Source code (ZIP)
    1 download
  • Source code (TAR.GZ)
    1 download

  ---

  • python_mobius-0.6.0-py3-none-any.whl
    3 downloads · 2026-08-31 10:27:17 +01:00 · 128 KiB
  • python_mobius-0.6.0.tar.gz
    1 download · 2026-08-31 10:27:18 +01:00 · 240 KiB
• v0.5.0 91d0f726f2

  Compare

  v0.5.0 Stable

  r3pek released this 2026-08-23 22:17:16 +01:00 | 84 commits to main since this release

  • get_pump_telemetry() now returns gph_reliable/minimum_gph/maximum_gph
    -- confirmed via the app's own logic that a raw gph reading isn't
    trustworthy without a supported flow range (a real AI Axis 20
    reported ~8x its own rated max flow).
  • Added support for AquaIllumination devices' own BLE company ID
    (0x0001, alongside EcoTech Marine's 0x0202) -- confirmed via a real
    AI Axis 20 capture. BREAKING: MOBIUS_COMPANY_ID renamed to
    MOBIUS_COMPANY_ID_ECOTECH.
  • Added get_lunar_phase_info(): the device's own firmware-computed
    lunar state, confirmed against real hardware, wired into
    --dump-schedule for comparing against the calculated lunar value.
  • Fixed get_lunar_phase_info() silently returning None on a real read
    failure (indistinguishable from "unsupported") -- now only an empty
    response does that; an actual failure propagates.
  • Documented a confirmed bug in the app itself (double timezone
    application) that can make its own displayed lunar value roll over
    to the next day early -- this library's own calculation is correct
    and unaffected.
  • Added get_advanced_features(): VorTech's "Local Control"/"Led Auto
    Dim" and Radion's "Max Fan Speed"/"Fan Shutdown".
  • Added motor_power_watts to get_pump_telemetry() (Vectra/NYOS Quantum).
  • Added get_vectra_info() and get_coffee_info() (Vectra/NYOS Quantum
    settings, no real hardware to verify against).
  • Fixed get_firmware_versions() showing raw internal names instead of
    proper labels for AquaIllumination devices (Orbit/Axis, Prime/Hydra).
  • RelayedMobiusDevice now fails fast on later reads in the same poll
    cycle after one relay timeout, instead of each one separately
    waiting out its own timeout.
  • Added set_time_to_now() -- writes Epoch with group=1, confirmed
    against real hardware to propagate to the rest of a tank's mesh.
  • Added reboot() -- soft-reboots a device (Reset attribute), matching
    the app's own "Restart" button. Confirmed against real hardware
    directly connected.

  Downloads

  • Source code (ZIP)
    1 download
  • Source code (TAR.GZ)
    2 downloads

  ---

  • python_mobius-0.5.0-py3-none-any.whl
    2 downloads · 2026-08-23 22:17:18 +01:00 · 99 KiB
  • python_mobius-0.5.0.tar.gz
    1 download · 2026-08-23 22:17:19 +01:00 · 189 KiB