26 releases 32 tags

RSS feed

• v0.3.4 88967b59b7

  Compare

  v0.3.4 Stable

  r3pek released this 2026-08-18 11:46:42 +01:00 | 153 commits to main since this release

  • Fixed a device's name sometimes staying stuck as "Mobius device
    (SERIAL)" even after it started working again.
  • Fixed the firmware version sensor showing "Unknown" for
    AquaIllumination-brand devices (AI Prime, AI Axis, and similar).
  • Now requires python-mobius 0.4.4 (still auto-installed, nothing to
    do manually), for its own fixes to the device model list and to the
    lunar-phase light intensity calculation.

  Downloads

  • Source code (ZIP)
    3 downloads
  • Source code (TAR.GZ)
    3 downloads

  ---

  • mobius.zip
    2 downloads · 2026-08-18 11:46:43 +01:00 · 307 KiB
• v0.3.3 4300fc9e75

  Compare

  v0.3.3 Stable

  r3pek released this 2026-08-14 19:30:40 +01:00 | 159 commits to main since this release

  • Fixed some sensors (motor speed, flow rate, light intensity,
    calibration, and similar) sometimes showing "Unavailable" forever
    after a reboot, for one or two devices on a tank, even though
    everything else about that device kept updating normally. Caused by
    a relayed (non-gateway) device's own very first read sometimes
    failing right after startup -- often because Home Assistant's own
    Bluetooth cache isn't fully warmed up yet at that exact moment. That
    first read now gets a couple of quick retries, and, as a backstop,
    Mobius periodically checks for and fills in any sensors that still
    ended up missing.

  Downloads

  • Source code (ZIP)
    1 download
  • Source code (TAR.GZ)
    1 download

  ---

  • mobius.zip
    2 downloads · 2026-08-14 19:30:42 +01:00 · 305 KiB
• v0.3.2 2f79014dd0

  Compare

  v0.3.2 Stable

  r3pek released this 2026-08-14 14:46:27 +01:00 | 161 commits to main since this release

  • Fixed relayed devices (anything reached through a gateway, not
    directly over BLE) sometimes getting stuck failing every single
    update for extended periods, even though the gateway itself and
    every other device on the tank kept working fine the whole time. If
    a device keeps failing to relay through its current gateway, a
    different gateway now gets tried automatically instead of needing a
    manual reload to recover.
  • Fixed a device occasionally going missing from Home Assistant's own
    Bluetooth cache for a long stretch, even while still nearby and
    broadcasting. Mobius now periodically checks its own gateway is
    still visible there and asks Home Assistant to do a quick active
    scan if not, rather than only finding out reactively once something
    actually failed to connect.
  • Now requires python-mobius 0.4.3 (still auto-installed, nothing to
    do manually) and won't automatically move to its next minor version
    even once one exists, to avoid a python-mobius change breaking
    Mobius before a matching update here has actually been tested
    against it.

  Downloads

  • Source code (ZIP)
    2 downloads
  • Source code (TAR.GZ)
    2 downloads

  ---

  • mobius.zip
    2 downloads · 2026-08-14 14:46:29 +01:00 · 302 KiB
• v0.3.1 0c98b4b790

  Compare

  v0.3.1 Stable

  r3pek released this 2026-08-13 15:21:42 +01:00 | 174 commits to main since this release

  • Fixed the "Discovered at" sensor, which could show confusing,
    out-of-order values. It's now a "last seen" attribute on the mesh
    address sensor instead, updating about every 30 seconds.
  • Fixed gateway failover getting stuck bouncing between the same two
    devices forever on a tank with more than two, never trying the
    others.
  • A tank now checks and refreshes its own connection info (which
    device to reconnect through, addresses) about once a minute instead
    of every 12 hours, so a device that couldn't be reached comes back
    much sooner once it's reachable again.
  • Fixed newly-added devices sometimes never showing up in Home
    Assistant, even though they were clearly nearby and broadcasting.
  • Removing a device (or a whole tank) now also tells Home Assistant to
    forget it was seen before, so re-adding the same physical device
    later isn't silently blocked.
  • Now requires Home Assistant 2026.7.0 or newer.
  • Added a lot more detail to debug logging (Settings > Devices &
    Services > Mobius > Enable debug logging) -- connection attempts,
    gateway elections and failovers, and mesh scans are all covered now,
    to make it much easier to see what's going on if something isn't
    connecting.
  • The diagnostics download now also shows whether Home Assistant
    itself currently sees each device over Bluetooth, separately from
    what Mobius has cached -- useful for telling "Mobius's own cached
    info is stale" apart from "Home Assistant hasn't seen this device
    recently" when nothing's connecting.
  • Most sensors now have a proper icon instead of the generic default.

  Downloads

  • Source code (ZIP)
    3 downloads
  • Source code (TAR.GZ)
    1 download

  ---

  • mobius.zip
    3 downloads · 2026-08-13 15:21:44 +01:00 · 298 KiB
• v0.3.0 e9f329df13

  Compare

  v0.3.0 Stable

  r3pek released this 2026-08-10 01:38:26 +01:00 | 193 commits to main since this release

  • Devices can now be added as a full tank instead of one at a time.
    When a new device is found, Mobius checks whether it's part of a
    bigger setup and offers to add every device on that tank at once.
    Devices in the same tank are grouped together under one hub in the
    device list.
  • The "add tank" screen now lists the actual devices found, and lets
    you name the tank right there.
  • A newly found device that belongs to a tank you've already set up
    gets added to it automatically -- no need to set it up separately.
  • Mobius now periodically double-checks which devices are actually on
    each tank. If a device turns up on a different tank you've already
    set up (for example, after moving it to another aquarium), it gets
    moved there automatically. A device that just goes quiet is left
    alone, though -- it's not removed.
  • Fixed a real bug where a tank could fail to load at all if even one
    of its devices was temporarily unreachable, even after a restart.
    Now the tank loads as long as at least one device responds; a
    device that's still unreachable just shows unavailable instead of
    blocking the whole tank.
  • Setting up a tank now only needs to connect to one device, not one
    per device -- Mobius learns where the rest are from that single
    connection instead. Faster setup, less Bluetooth traffic.
  • Added Mesh address, Discovered at, and Mesh prefix diagnostic
    sensors.
  • Added a "Gateway device" sensor showing which device is currently
    relaying for the rest of a tank, by name.
  • Added support for Home Assistant's built-in diagnostics download
    (Settings > Devices & Services > Mobius > your tank > Download
    diagnostics), useful if you ever need to report an issue.
  • Various reliability and under-the-hood fixes.

  After upgrading: your existing Mobius devices will show as failed.
  This is expected -- remove them and Home Assistant will find them again
  automatically, this time offering to add each tank as a whole. Do this
  after upgrading, not before, so rediscovery happens under the new
  version from the start.

  Downloads

  • Source code (ZIP)
    3 downloads
  • Source code (TAR.GZ)
    2 downloads

  ---

  • mobius.zip
    3 downloads · 2026-08-10 01:38:27 +01:00 · 292 KiB
• v0.2.2 726c6117a8

  Compare

  v0.2.2 Stable

  r3pek released this 2026-08-07 15:24:14 +01:00 | 211 commits to main since this release

  • Requires python-mobius>=0.3.1 for a real, high-impact fix in
    that library: Brightness (the schedule's master dimmer channel) was
    never being applied to any other channel at all -- every channel,
    moonlight included, was being interpolated and returned without ever
    being scaled by Brightness. Found via real hardware testing: a light
    showing ~1% in the app's own display came back as ~25% from this
    integration's sensors at the same moment. No code changes needed on
    this side -- LightChannelIntensitySensor (and everywhere else that
    reads current_intensities) already just displays whatever
    python-mobius computes, so this integration picks up the corrected
    values automatically once the dependency is upgraded. Confirmed by
    actually installing the fixed python-mobius into this project's own
    test environment and running the full suite against it (98/98 still
    passing), not just assumed compatible from reading the change.

  • Fixed two real hassfest findings, caught once its CI check actually
    started running. manifest.json's keys weren't in hassfest's
    required order (domain, name, then alphabetical) -- reordered.
    Added CONFIG_SCHEMA = cv.config_entry_only_config_schema(DOMAIN):
    hassfest requires any integration implementing async_setup to define
    one of CONFIG_SCHEMA/PLATFORM_SCHEMA/PLATFORM_SCHEMA_BASE (or a
    helper equivalent); this integration is config-entry-only (no YAML
    configuration.yaml support at all), so
    config_entry_only_config_schema is the correct one -- confirmed via
    real behavior testing that it doesn't raise if someone configures it
    via YAML anyway, it logs a clear error and creates a Home Assistant
    Repairs issue instead, which is the actual intended, more
    user-friendly handling. 2 new tests.

  Downloads

  • Source code (ZIP)
    3 downloads
  • Source code (TAR.GZ)
    3 downloads

  ---

  • mobius.zip
    3 downloads · 2026-08-07 15:24:15 +01:00 · 271 KiB